MINISTRY OF SCIENCE AND TECHNOLOGY | SOCIALIST REPUBLIC OF VIETNAM |
No. 14/VBHN-BKHCN | Hanoi, February 27, 2015 |
DECISION
METHOD FOR DETERMINATION OF DOMESTIC CONTENT OF AUTOMOBILES
Decision No. 28/2004/QĐ-BKHCN dated October 01, 2004 of the Minister of Science and Technology on method for determination of domestic content of automobiles, effective since March 17, 2005, is amended by:
1. Decision No. 05/2005/QĐ-BKHCN dated May 11, 2005 on amendments to Decision No. 28/2004/QĐ-BKHCN, effective since June 10, 2005;
2. Circular No. 05/2012/TT-BKHCN dated March 12, 2012 of the Minister of Science and Technology on amendments to Article 1 of Decision No. 05/2005/QĐ-BKHCN, effective since April 30, 2012.
Pursuant to Ordinance on Goods quality 1999;
Pursuant to the Government's Decree No. 54/2003/NĐ-CP dated May 19, 2003 defining functions, tasks, entitlements and organizational structure of the Ministry of Science and Technology; the Government's Decree No. 28/2004/NĐ-CP dated January 16, 2004 on amendments of Decree No 54/2003/NĐ-CP;
Pursuant to the Prime Minister’s Decision No. 175/2002/QĐ-TTg dated December 03, 2002 approving the strategy for development of Vietnam’s automobile industry by 2010 and the orientation towards 2020;
Pursuant to the Prime Minister’s Notice No. 82/TB-VPCP dated June 16, 2003, Official Dispatch No. 4659/VPCP-KG dated September 24, 2003, Notice No. 63/TB-VPCP dated April 02, 2004 and Official Dispatch No. 2943/VPCP-KG dated June 11, 2004 of Office of the Government;
At the request of Director of Directorate for Standards, Metrology and Quality and Director of the Legal Department,
Article 1. This Decision provides for determination of domestic contents of automobiles, grades of components and responsibilities of relevant agencies for determination of domestic contents of automobiles.
Article 2. Definitions
For the purpose of this Decision, the terms below are construed as follows:
1. Component means a component, a group of components that form a complete automobile.
2. Domesticized component means a component that is manufactured domestically to substitute imported ones.
3. Domestic content of an automobile means the total grade of domestic components on a scale from 1 - 100.
Article 3. Domestic content of each type of components depends on its grade specified in Appendix 1 through 4 enclosed herewith.
Article 4. Target domestic contents of each stage:
1. For common automobiles (for passenger and cargo transport specified in TCVN 7271:2003): 40% by 2005, 45% by 2006, 50% by 2007, 55% by 2008 and 60% by 2010.
For engines: 30% by 2005, 50% by 2006, 40% by 2007, 45% by 2008 and 50% by 2010; For gearboxes: 65% by 2005, 70% by 2006, 75% by 2007, 80% by 2008, 85% by 2009 and 90% by 2010.
2. For special-purpose automobiles (specified in 3.3 of TCVN 7271:2008): 40% by 2005, 45% by 2006, 50% by 2007, 55% by 2008 and 60% by 2010.
3. For high-grade tourist automobiles manufactured by joint ventures (specified in 3.1.1 of TCVN 7271: 2003): 20-25% by 2005, 30-35% by 2007 and 40-45% by 2010.
For high-grade buses: 20% by 2005, 30% by 2007 and 35-40% by 2010.
Article 5. Determination of domestic content
1. The Ministry of Science and Technology shall consider issuing certificates of domestic contents declared and registered by enterprises according to Appendix 1 through 4 enclosed herewith.
The Ministry of Science and Technology shall establish interdisciplinary inspectorates to inspect domestic contents of automobiles.
2. Auto parts purchased by a manufacturer from another domestic manufacturer shall be graded similarly to those manufactured by the former itself.
3. Imported semi-finished components for further processing shall be graded according to their added value.
4. Auto parts imported or purchased from an importer shall be excluded from domestic content.
a) Fragmentation of imported auto parts:
- Body and chassis (of sedans, minibuses, buses and truck cabins): 6 main assemblies, not powder coated: roof assembly, floor assembly, left body assembly, right body assembly, front body assembly, rear body assembly and connectors (if any).
- Chassis: connected and not powder coated. A chassis of at least 3.7 m in length may be powder coated before import.
- Engine: complete and may be assembled with the clutch and gearbox.
- Transmission system: assembled or not assembled with the braking system.
- Electrical system, lighting and utilities: the electrical wire system, dashboard, lights and utilities are not assembled with the body or cabin.
- Trunk: The floor, right panel, left panel, rear panel and front panel are not assembled, not painted; the floor is not assembled with the secondary chassis when imported.
b) In case of failure to meet any of the requirements in (a) because of changes in manufacturing technology and auto parts, or because of new properties in the structure of the vehicle or parts thereof, the fragmentation of imported auto parts are subject to approval by the Ministry of Science and Technology.
c) Appendices 5 through 8 enclosed herewith are for illustration purpose only and are not the basis for determination of fragmentation of auto parts.
5. Any enterprise that commits violations or declares untruthful domestic content shall be dealt with in accordance with law.
Article 6.This Decision replaces Decision No. 20/2003/QĐ-BKHCN dated July 31, 2008 of the Minister of Science and Technology and comes into force after 15 days from the day on which it is published on Official Gazette.
Article 7. Director of the Directorate for Standards, Metrology, and Quality, Director of Technology Assessment Department, Director of Science and Technology Departments of technological authorities, Directors of the Legal Department, Chief of Office, relevant organizations and individuals are responsible for the implementation of this Decision./.
| CERTIFIED BY DEPUTY MINISTER |
Appendix 1. MAIN ASSEMBLIES OF AUTOMOBILES FOR THE TRANSPORT OF AT LEAST 10 PEOPLE (HEADING 8702)
(Promulgated together with Decision No.28/2004/QĐ-BKHCN dated October 01, 2004 of the Minister of Science and Technology)
No. | Main assemblies | Highest grade | Annex | |
1 | Body, chassis, relevant assemblies, paintwork, welding work of body and chassis | 32,5 |
| |
1.1 | Body, chassis and relevant assemblies | 23,5 | Annex 1.1 | |
1.2 | Paintwork and welding work of body and chassis | 9 | Annex 1.2 | |
2 | Engine – Clutch - Gearbox | 26 |
| |
2.1 | Engine | 19 | Annex 2.1 | |
2.2 | Clutch | 2 | Annex 2.2 | |
2.3 | Gearbox | 5 | Annex 2.8 | |
3 | Transmission system | 12 |
| |
3.1 | Front axle | 3 | Annex 3.1 | |
3.2 | Rear axle | 5 | Annex 3.2 | |
3.3 | Propeller shaft assembly | 2 | Annex 3.3 | |
3.4 | Inner tube, tire, rim | 2 | Annex 3.4 | |
4 | Braking system | 3 | Annex 4 | |
5 | Suspension system | 4 | Annex 5 | |
6 | Steering system | 4 | Annex 6 | |
7 | Electrical system | 4 | Annex 7 | |
8 | Interiors | 10 | Annex 8 | |
9 | Other assemblies | 1,5 | Annex 9 | |
10 | Assembly process | 3 | Annex 10 | |
Total | Total | 100 |
| |
Annex 1.1 Main parts in the body, chassis and relevant assemblies
No. | Name | Unit | Quantity in 01 automobile | Grade | |||
1 | Frame | pcs | 1 | 5,00 | |||
2 | Front bumper | pcs | 1 | 0,50 | |||
3 | Rear bumper | pcs | 1 | 0,30 | |||
4 | Chassis assembly | Set/vehicle | 1 | 5,50 | |||
5 | Head assembly | pcs | 1 | 1,30 | |||
6 | Tail assembly | pcs | 1 | 1,00 | |||
7 | Roof | pcs | 1 | 1,80 | |||
8 | Vent | pcs | Varying | 0,50 | |||
9 | Right rocker panel | set | 1 | 1,90 | |||
10 | Left rocker panel | set | 1 | 1,90 | |||
11 | Tailgate or cargo bracket in the automobile | set | 1 | 0,60 | |||
12 | Driver door | pcs | Varying | 0,90 | |||
13 | Passenger door | pcs | Varying | 1,80 | |||
14 | Rear door | pcs | Varying | 0,30 | |||
15 | Other components |
|
| 0,20 | |||
Total | Total | Total | Total | 23,50 | |||
Annex 1.2. Paintwork and welding work of body and chassis
No. | Name | Unit | Quantity in 01 automobile | Grade | |||
1 | Paintwork of body and chassis |
|
| 5,00 | |||
2 | Welding of body and chassis |
|
| 4,00 | |||
Total | Total | Total | Total | 9,00 | |||
Annex 2.1. Main components of the engine
No. | Name | Unit | Quantity in 01 automobile | Grade | |||
1 | Engine body | pcs | 1 | 3,50 | |||
2 | Head covers + head gasket | assembly | 1 | 1,00 | |||
3 | Piston + piston ring | assembly | Varying | 0,50 | |||
4 | Cylinder liner (if any) | assembly | 1 | 0,40 | |||
5 | Crankshaft | pcs | 1 | 1,50 | |||
6 | Crankshaft bearing | pcs | Varying | 0,20 | |||
7 | Crank + ring | pcs | Varying | 0,40 | |||
8 | Flywheel + ring gear | pcs | 1 | 0,70 | |||
9 | Radiator + pipework and valves | pcs | 1 | 1,50 | |||
10 | Water pump | pcs | 1 | 0,50 | |||
11 | Oil pump | pcs | 1 | 0,50 | |||
12 | Dry oil filter | pcs | 1 | 0,25 | |||
13 | Micro oil filter | pcs | 1 | 0,50 | |||
14 | Oil pipes | assembly | 1 | 0,25 | |||
15 | Cam shaft | pcs | Varying | 1,00 | |||
16 | Cam shaft ring | pcs | Varying | 0,25 | |||
17 | Cams, pushrods, rockers | assembly | Varying | 0,50 | |||
18 | Valves, pipes, springs | assembly | Varying | 0,50 | |||
19 | Catalytic converter | pcs | 1 | 0,50 | |||
20 | Fuel injection pipe assembly | pcs | 1 | 0,125 | |||
21 | Exhaust pipe assembly | pcs | 1 | 0,125 | |||
22 | Fuel tank | pcs | 1 | 0,10 | |||
23 | Water separator (primary) | pcs | 1 | 0,25 | |||
24 | Water separator (secondary) | pcs | 1 | 0,40 | |||
25 | Fuel pump | pcs | 1 | 0 ,75 | |||
26 | Carburettor (high-pressure pump) | pcs | 1 | 1,75 | |||
27 | Spark plug (fuel injector) | pcs | Varying | 0,25 | |||
28 | Connecting pipes | assembly | 1 | 0,25 | |||
29 | Pulleys + belts | assembly | 1 | 0,25 | |||
30 | Other components | assembly |
| 0,3 | |||
Total | Total | Total | Total | 19,00 | |||
Annex 2.2. Main components of the clutch
No. | Name | Unit | Quantity in 01 automobile | Grade | |||
1 | Clutch housing | pcs | 1 | 0,25 | |||
2 | Friction disc | assembly | 1 | 0,625 | |||
3 | Plain plate, springs, rivets | assembly | 1 | 0,75 | |||
4 | Clutch transmission system (pedal, crank, throw-out lever) | assembly | 1 | 0,125 | |||
5 | Pressure plate | pcs | 1 | 0,25 | |||
6 | Shock absorbtion springs and diaphragm spring | pcs | 1 | 0,125 | |||
7 | Other components |
|
| 0,25 | |||
Total | Total | Total | Total | 2,00 | |||
Annex 2.3. Main components of the gearbox assembly
No. | Name | Unit | Quantity in 01 automobile | Grade | |||
1 | Gearbox housing (main gearbox, auxilliary gearbox, transfer case) | pcs | Varying | 1,50 | |||
2 | Gearbox cover | pcs | Varying | 0,50 | |||
3 | Transmission control assembly (positioning mechanism, braking mechanism, gearshift lever, etc.) | assembly | 1 | 0,50 | |||
4 | Gears | assembly | 1 | 1,10 | |||
5 | Gearbox shaft assembly (input shaft, layshaft, output shaft, reverse shaft, etc.) | assembly | 1 | 1,10 | |||
6 | Ball bearings, washers, shaft seals | assembly | 1 | 0,20 | |||
7 | Other components |
|
| 0,10 | |||
Total | Total | Total | Total | 5,00 | |||
Annex 3.1. Main components of front axle assembly
No. | Name | Unit | Quantity in 01 automobile | Grade | |||
1 | Front axle | set | 1 | 2,25 | |||
2 | Front brake hubs (left/right) | set | 2 | 0,5 | |||
3 | Other components |
|
| 0,25 | |||
Total | Total | Total | Total | 3,00 | |||
Annex 3.2. Main components of rear axle assembly
No. | Name | Unit | Quantity in 01 automobile | Grade | |||
1 | Rear axle housing | set | 1 | 1,75 | |||
2 | Drivetrain, differential | set | 2 | 1,75 | |||
3 | Side shaft | set | 1 | 0,75 | |||
4 | Rear brake hubs (left/right) | set | 2 | 0,50 | |||
5 | Other components |
|
| 0,25 | |||
Total | Total | Total | Total | 5,00 | |||
Annex 3.3. Main components of propeller shaft assembly
No. | Name | Unit | Quantity in 01 automobile | Grade | |||
1 | Front propeller shaft | set | 1 | 0,60 | |||
2 | Journal + bearings | set | 1 | 0,30 | |||
3 | Rear propeller shaft | set | 1 | 0,80 | |||
4 | Bearing shafts | set | 1 | 0,20 | |||
5 | Other components |
|
| 0,10 | |||
Total | Total | Total | Total | 2,00 | |||
Annex 3.4. Main components of tires, inner tubes, rims
No. | Name | Unit | Quantity in 01 automobile | Grade | |||
1 | Rims and beadlocks | set | 5-7 | 0,90 | |||
2 | Inner tube, tire, rim tapes | set | 5-7 | 0,90 | |||
3 | Other components | set |
| 0,20 | |||
Total | Total | Total | Total | 2,00 | |||
Annex 4. Main components of the braking system
No. | Name | Unit | Quantity in 01 automobile | Grade | ||||
1 | Air compressor | pcs | 1 | 0,50 | ||||
2 | Brake chamber (or hydraulic cylinder) | pcs | 4 | 0,70 | ||||
3 | Air tank | pcs | 1 | 0,30 | ||||
4 | Pipes and valves | set | 1 | 0,40 | ||||
5 | Brake pedal | pcs | 1 | 0,10 | ||||
6 | Brake pads and brake shoes | set | 4 | 0,50 | ||||
7 | Handbrake | pcs | 1 | 0,20 | ||||
8 | Other components |
|
| 0,30 | ||||
Total | Total | Total | Total | 3,00 | ||||
Annex 5. Main components of the suspension system
No. | Name | Unit | Quantity in 01 automobile | Grade | ||||
1 | Leaf springs (main/auxillary/front/rear) | Set/pcs | 4 | 2,30 | ||||
2 | Spring eye | pcs | 8 | 0,10 | ||||
3 | Spring hanger | pcs | 4 | 0,10 | ||||
4 | Spring bolt | pcs | 4 | 0,10 | ||||
5 | Spring shackle | pcs | 4 | 0,10 | ||||
6 | Shock absorber | pcs | 4 | 0,90 | ||||
7 | Shock absorber support | pcs | 4 | 0,10 | ||||
8 | Other components |
|
| 0,30 | ||||
Total | Total | Total | Total | 4,00 | ||||
Annex 6. Main components of the steering system
No. | Name | Unit | Quantity in 01 automobile | Grade | |||
1 | Steering wheel | pcs | 1 | 0,30 | |||
2 | Steering column | pcs | 1 | 0,70 | |||
3 | Steering gear, including steering assist system (if any) | pcs | 1 | 2,00 | |||
4 | Pitman arm | set | 1 | 0,20 | |||
5 | Drag link | set | 1 | 0,10 | |||
6 | Drag link support | set | 1 | 0,10 | |||
7 | Steering arms and rods | set | 1 | 0 40 | |||
8 | Other components |
|
| 0,20 | |||
Total | Total | Total | Total | 4,00 | |||
Annex 7. Main components of the electrical system
No. | Name | Unit | Quantity in 01 automobile | Grade | |||
1 | Battery | pcs | 2 | 0,20 | |||
2 | Electrical wires | Set/vehicle | 1 | 0,25 | |||
3 | Low beam and high beam lights | Set/pcs | 2 | 0,50 | |||
4 | Tail lights | Set/pcs | 2 | 0,25 | |||
5 | Turn signals | Set/pcs | 4 | 0,15 | |||
6 | Interior lights | Set/pcs | Varying | 0,25 | |||
7 | Stop button | pcs | Varying | 0,10 | |||
8 | Wiper | Set/pcs | 2 | 0,65 | |||
9 | Electric clock | pcs | Varying | 0,10 | |||
10 | Generator and electric starter | set | 1 | 0,50 | |||
11 | Meters | Set/vehicle | Varying | 0,80 | |||
12 | Other components |
|
| 0,25 | |||
Total | Total | Total | Total | 4,00 | |||
Annex 8. Main components of the interior assembly
No. | Name | Unit | Quantity in 01 automobile | Grade | |||
1 | Window frames | set | 1 | 0,30 | |||
2 | Window glasses | set | 1 | 0,50 | |||
3 | Glass run channel | set | 1 | 0,10 | |||
4 | Driver side window glass | pcs | 1 | 0,15 | |||
5 | Driver glass run channel | pcs | 1 | 0,01 | |||
6 | Front glass run channel | pcs | 1 | 0,15 | |||
7 | Windshield | pcs | 1 | 1,03 | |||
8 | Rear window | pcs | 1 | 0,50 | |||
9 | Rear glass run channel | pcs | 1 | 0,10 | |||
10 | Mirrors (side, rear, interior) | Set/vehicle | 1 | 0,20 | |||
11 | Door locks and window controllers | Set/vehicle | 1 | 0,15 | |||
12 | Floor | Set/vehicle | 1 | 0,50 | |||
13 | Floor mat | Set/vehicle | 1 | 0,20 | |||
1 4 | Interior lining materials | Set/vehicle | 1 | 1,00 | |||
15 | Noise isolating and anti-vibration materials | Set/vehicle | 1 | 0,10 | |||
16 | Handles + stands | Set/vehicle | 1 | 0,10 | |||
17 | Automatic power door locks | set | Varying | 0,20 | |||
18 | Radio cattsette + speakers + microphone | Set/vehicle | Varying | 0,45 | |||
19 | Dashboard | Set/vehicle | Varying | 0,45 | |||
20 | Driver’s seat | pcs | 1 | 0,20 | |||
21 | Passenger’s seat | pcs | Varying | 0,03 | |||
22 | A/C compressor | pcs | 1 | 1,50 | |||
23 | A/C condenser | pcs | 1 | 0,70 | |||
24 | Evaporator | pcs | 1 | 0,60 | |||
25 | Pipework | pcs | 1 | 0,60 | |||
26 | Other components |
|
| 0,18 | |||
Total | Total | Total | Total | 10,00 | |||
Annex 9. Other components
No. | Name | Unit | Quantity in 01 automobile | Grade | |||
1 | First aid kit and fire safety equipment | pcs | 1 | 0,50 | |||
2 | Car tool kit | pcs | 1 | 0,50 | |||
3 | Other components | pcs |
| 0,50 | |||
Total | Total | Total | Total | 1,60 | |||
Annex 10. Assembly
No. | Name | Unit | Quantity in 01 automobile | Grade | |||
1 | Assembly process |
|
| 3,00 | |||
Total | Total | Total | Total | 3,00 | |||
Appendix 2. MAIN ASSEMBLIES OF AUTOMOBILES FOR THE TRANSPORT OF UP TO 9 PEOPLE (HEADING 8703)
(Promulgated together with Decision No.28/2004/QĐ-BKHCN dated October 01, 2004 of the Minister of Science and Technology)
No. | Main assemblies | Highest grade | Annex | |
1 | Body, chassis, relevant assemblies, paintwork, welding work of body and chassis | 32 |
| |
1.1 | Body, chassis and relevant assemblies | 23 | Annex 1.1 | |
1.2 | Paintwork and welding work of body and chassis | 9 | Annex 1.2 | |
2 | Engine, clutch, gearbox | 27 |
| |
2.1 | Engine | 20 | Annex 2.1 | |
2.2 | Clutch | 2 | Annex 2.2 | |
2.3 | Gearbox | 5 | Annex 2.3 | |
3 | Transmission system | 14 |
| |
3.1 | Front axle | 4 | Annex 3.1 | |
3.2 | Rear axle | 6 | Annex 3.2 | |
3.3 | Propeller shaft | 2 | Annex 3.3 | |
3.4 | Inner tube, tire, rim | 2 | Annex 3.4 | |
4 | Braking system | 3,5 | Annex 4 | |
5 | Suspension system | 3 | Annex 5 | |
6 | Steering system | 4 | Annex 6 | |
7 | Electrical system | 5 | Annex 7 | |
8 | Interiors | 7 | Annex 8 | |
9 | Other assemblies | 1,5 | Annex 9 | |
10 | Assembly process | 3 | Annex 10 | |
Total | Total | 100 |
| |
Annex 1.1 Main parts in the body, chassis and relevant assemblies
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Head assembly: | assembly | 1 |
| |||
1.1 | Engine compartment | pcs | 1 | 0,50 | |||
1.2 | Grille | pcs | 1 | 0,25 | |||
1.3 | Hood | pcs | 1 | 0,25 | |||
1.4 | Control panel | pcs | 1 | 0,35 | |||
1.5 | Partition | pcs | 1 | 0,15 | |||
1.6 | Fender | pcs | 2 | 0,35 | |||
1.7 | Front bumper | pcs | 1 | 0,15 | |||
2 | Tail assembly: | assembly | 1 |
| |||
2.1 | Trunk | pcs | 1 | 0,85 | |||
2.2 | Partition (if any) | pcs | 1 | 0,15 | |||
2.3 | Trunk lid | pcs | 1 | 0,25 | |||
2.4 | Tailgate | pcs | 1 | 0,25 | |||
2.5 | Fender | pcs | 2 | 0,35 | |||
2.6 | Rear bumper | pcs | 1 | 0,15 | |||
3 | Roof | pcs | 1 | 1,00 | |||
4 | Floor: | pcs | 1 |
| |||
4.1 | Front floor | pcs | 1 | 0,75 | |||
4.2 | Body under | pcs | 1 | 0,50 | |||
4.3 | Rear floor | pcs | 1 | 0,75 | |||
5 | Left body assembly | pcs | 1 | 3,00 | |||
6 | Right body assembly | pcs | 1 | 3,00 | |||
7 | Frame and relevant parts | pcs | 1 | 3,50 | |||
8 | Doors: | set | 1 |
| |||
8.1 | Left doors | pcs | 2 | 1,75 | |||
8.2 | Right doors | pcs | 2 | 1,75 | |||
8.3 | Rear doors (if any) | pcs | 1 | 0,50 | |||
9 | Glasses: |
|
|
| |||
9.1 | Windshield | pcs | 1 | 1,50 | |||
9. | Side and rear window glasse | pcs | Varying | 0,50 | |||
10 | Other components (glass run channels, washers, locks, etc.) |
|
| 0,50 | |||
Total | Total | Total | Total | 23,00 | |||
Annex 1.2. Paintwork and welding work of body and chassis
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Paintwork of body and chassis |
|
| 5,00 | |||
2 | Welding of body and chassis |
|
| 4,00 | |||
Total | Total | Total | Total | 9,00 | |||
Annex 2.1. Main components of the engine
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Engine body | pcs | 1 | 3,500 | |||
2 | Head covers + head gasket | assembly | 1 | 1,000 | |||
3 | Piston + piston ring | assembly | Varying | 0,500 | |||
4 | Cylinder liner (if any) | assembly | 1 | 0,400 | |||
5 | Crankshaft | pcs | 1 | 1,800 | |||
6 | Crankshaft bearing | pcs | Varying | 0,200 | |||
7 | Crank + ring | pcs | Varying | 0,400 | |||
8 | Flywheel + ring gear | pcs | 1 | 0,700 | |||
9 | Radiator + pipework and valves | pcs | 1 | 1,500 | |||
10 | Water pump | pcs | 1 | 0,750 | |||
11 | Oil pump | pcs | 1 | 0,750 | |||
12 | Oil filter | pcs | 1 | 0,250 | |||
13 | Micro oil filter | pcs | 1 | 0,500 | |||
14 | Oil pipes | assembly | 1 | 0,250 | |||
15 | Cam shaft | pcs | Varying | 1,300 | |||
16 | Cam shaft ring | pcs | Varying | 0,250 | |||
17 | Cams, pushrods, rockers | assembly | Varying | 0,500 | |||
18 | Valves, pipes, springs | assembly | Varying | 0,500 | |||
19 | Catalytic converter | pcs | 1 | 0,500 | |||
20 | Fuel injection pipe assembly | pcs | 1 | 0,125 | |||
21 | Exhaust pipe assembly | pcs | 1 | 0,125 | |||
22 | Fuel tank | pcs | 1 | 0,100 | |||
23 | Water separator (primary) | pcs | 1 | 0,250 | |||
24 | Water separator (secondary) | pcs | 1 | 0,400 | |||
25 | Fuel pump | pcs | 1 | 0,750 | |||
26 | Carburettor (high-pressure pump) | pcs | 1 | 1,750 | |||
27 | Spark plug (fuel injector) | pcs | Varying | 0,250 | |||
28 | Connecting pipes | assembly | 1 | 0,250 | |||
29 | Pulleys + belts | assembly | 1 | 0,250 | |||
30 | Other components |
|
| 0,200 | |||
Total | Total | Total | Total | 20,000 | |||
Annex 2.2. Main components of the clutch
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Clutch housing | pcs |
| 0,250 | |||
2 | Friction disc | pcs |
| 0,625 | |||
3 | Plain plate, springs, rivets | assembly |
| 0,375 | |||
4 | Clutch transmission system (pedal, crank, throw-out lever, etc.) | assembly |
| 0,125 | |||
5 | Pressure plate | pcs |
| 0,250 | |||
6 | Shock absorbtion springs and diaphragm spring | pcs |
| 0,125 | |||
7 | Other components |
|
| 0,250 | |||
Total | Total | Total | Total | 2,000 | |||
Annex 2.3. Main components of the gearbox assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Gearbox housing (main gearbox, auxilliary gearbox, transfer case) | pcs | Varying | 1,25 | |||
2 | Gearbox cover | pcs | Varying | 0 25 | |||
3 | Transmission control assembly (positioning mechanism, braking mechanism, gearshift lever, etc.) | assembly | 1 | 0 50 | |||
4 | Gears | assembly | 1 | 1,25 | |||
5 | Gearbox shaft assembly (input shaft, layshaft, output shaft, reverse shaft) | assembly | 1 | 1,25 | |||
6 | Ball bearings, washers, shaft seals | assembly | 1 | 0,25 | |||
7 | Other components | assembly |
| 0,25 | |||
Total | Total | Total | Total | 5,00 | |||
Annex 3.1. Main components of front axle assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Front axle (including driven front axle) | pcs | 1 | 2,50 | |||
2 | Front brake hub (left, right) | pcs | 1 | 1,25 | |||
3 | Other components |
|
| 0,25 | |||
Total | Total | Total | Total | 4,00 | |||
Annex 3.2. Main components of rear axle assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Rear axle housing | pcs | 1 | 1,50 | |||
2 | Drivetrain assembly | set | 1 | 1,50 | |||
3 | Differential | set | 1 | 0,50 | |||
4 | Side shaft | pcs | 2 | 0,50 | |||
5 | Rear brake hub (left/right) | pcs | 2 | 1,50 | |||
6 | Other components |
|
| 0,50 | |||
Total | Total | Total | Total | 6,00 | |||
Annex 3.3. Main components of propeller shaft assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Front propeller shaft | pcs | 1 | 0,55 | |||
2 | Journal | pcs | 1 | 0,40 | |||
3 | Rear propeller shaft | pcs | 1 | 0,55 | |||
4 | Bearing shafts | assembly | Varying | 0,25 | |||
5 | Other components |
|
| 0,25 | |||
Total | Total | Total | Total | 2,00 | |||
Annex 3.4. Main components of tires, inner tubes, rims
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Tire, inner tubes and rim tapes | set | Varying | 1,00 | |||
2 | Rims and beadlocks | set | Varying | 0,75 | |||
3 | Other components | set |
| 0,25 | |||
Total | Total | Total | Total | 2,00 | |||
Annex 4. Main components of the braking system
No. | Name | Unit | Quantity in 1 automobile | Grade |
1 | Air compressor | pcs | 1 | 0,50 |
2 | Brake chamber (or hydraulic cylinder) | pcs | 4 | 0,50 |
3 | Air tank | pcs | 1 | 0,70 |
4 | Pipes and valves | set | 1 | 0,40 |
5 | Brake pedal | pcs | 1 | 0,10 |
6 | Brake pads and brake shoes | set | 4 | 0,50 |
7 | Handbrake | pcs | 1 | 0,30 |
8 | Other components |
|
| 0,50 |
Total |
|
|
| 3,50 |
Annex 5. Main components of the suspension system
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Leaf springs (main/auxillary/front/rear) | set | 4 | 1,0 | |||
2 | Spring hanger | pcs | 8 | 0,1 | |||
3 | Spring eye | pcs | 8 | 0,1 | |||
4 | Spring bolt | pcs | 8 | 0,1 | |||
5 | Spring hanger | pcs | 4 | 0,1 | |||
6 | Spring shackle | pcs | 4 | 0,1 | |||
7 | Bolts, rubber pads, etc. | assembly | Varying | 0,1 | |||
8 | Shock absorbers | set | 1 | 1,0 | |||
9 | Shock absorber support | pcs | 8 | 0,1 | |||
10 | Other components |
|
| 0,3 | |||
Total | Total | Total | Total | 3,00 | |||
Annex 6. Main components of the steering system
No. | Name | Unit | Quantity in 1 automobile | Grade | ||||
1 | Steering wheel | pcs | 1 | 0,125 | ||||
2 | Steering column | pcs | 1 | 0,625 | ||||
3 | Steering gear, including steering assist system (if any) | set | 1 | 2,000 | ||||
4 | Pitman arm | pcs | 1 | 0,125 | ||||
5 | Drag link | pcs | 1 | 0,125 | ||||
6 | Drag link support | set | 1 | 0,100 | ||||
7 | Steering arms and rods | set | 1 | 0,750 | ||||
8 | Other components |
|
| 0,150 | ||||
Total | Total | Total | Total | 4,000 | ||||
Annex 7. Main components of the electrical system
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Engine electricity |
|
|
| |||
1.1 | Battery (including bracket, cover, etc.) | pcs | 1 | 0,125 | |||
1.2 | Starter motor | pcs | 1 | 0,750 | |||
1.3 | Generator | pcs | 1 | 0,750 | |||
1.4 | Ignition system (distributor, relays, spark plugs, ignition leads, etc.) | set | 1 | 0,375 | |||
2 | Automotive electrical system |
|
|
| |||
2.1 | Lights (low beam lights, high beam lights, rear lights, plate light, brake lights, turn singals, parking light, interior lights) | set | Varying | 1,25 | |||
2.2 | Power supply for air conditioning system | assembly | 1 | 0,125 | |||
2.3 | Power suppy for radio | assembly | 1 | 0,125 | |||
2.4 | Electric honk | pcs | 1 | 0,125 | |||
2.5 | Wiper | pcs | 2 | 0,125 | |||
2.6 | Meters on dashboard | set | Varying | 0,750 | |||
2.7 | Harness with fuse | set | 1 | 0,150 | |||
2.8 | Electric clock | pcs | Varying | 0,100 | |||
2.9 | Electric lock | pcs | 1 | 0,125 | |||
3 | Other components |
|
| 0,125 | |||
Total | Total | Total | Total | 5,000 | |||
Annex 8. Main components of the interior assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Ventilation and air conditioning system | System | 1 |
| |||
1.1 | Air compressor | pcs | 1 | 0,800 | |||
1.2 | A/C condenser | pcs | 1 | 1,000 | |||
1.3 | Evaporator | pcs | 1 | 0,800 | |||
1.4 | Valves | assembly | 1 | 0,125 | |||
1.5 | Pipework | assembly | 1 | 0,500 | |||
1.6 | Air filter | pcs | 1 | 0,500 | |||
1.7 | Fan | pcs | 1 | 0,250 | |||
2 | Radio + speakers + microphone | assembly | 1 | 1,000 | |||
3 | Driver’s seat | pcs | 1 | 0,400 | |||
4 | Passenger’s seats | set | 1 | 0,800 | |||
5 | Mirror | Set/vehicle | 1 | 0,100 | |||
6 | Driver glass run channels | set | 1 | 0,125 | |||
7 | floor mat | assembly | 1 | 0,025 | |||
8 | Interior lining materials + edges | assembly | 1 | 0,125 | |||
9 | Insulating and anti-vibration materials | assembly | 1 | 0,125 | |||
10 | Step | pcs | 1 | 0,125 | |||
11 | Other components |
|
| 0,200 | |||
Total | Total | Total | Total | 7,000 | |||
Annex 9. Other components
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | First aid kit and fire safety equipment | pcs | 1 | 0,50 | |||
2 | Car tool kit | pcs | 1 | 0,50 0,50 | |||
3 | Other components |
|
|
| |||
Total | Total | Total | Total | 1,50 | |||
Annex 10. Assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Assembly process |
|
| 2,50 | |||
Total | Total | Total | Total | 2,50 | |||
Appendix 3. MAIN ASSEMBLIES OF HEAVY-DUTY VEHICLES (HEADING 8705)
(Promulgated together with Decision No.28/2004/QĐ-BKHCN dated October 01, 2004 of the Minister of Science and Technology)
No. | Main assemblies | Highest grade | Annex | |
1 | Cabin, trunk, chassis, paintwork and welding of cabin, trunk and chassis | 24,7 |
| |
1.1 | Cabin, trunk, chassis | 19,2 | Annex 1.1 | |
1.2 | Paintwork of cabin, trunk, chassis | 5,5 | Annex 1.2 | |
2 | Engine – Clutch - Gearbox | 38 |
| |
2.1 | Engine | 32 | Annex 2.1 | |
2.2 | Clutch | 2,0 | Annex 2.2 | |
2.3 | Gearbox | 4,0 | Annex 2.3 | |
3 | Transmission system | 12 |
| |
3.1 | Front axle | 3,0 | Annex 3.1 | |
3.2 | Rear axle | 4,0 | Annex 3.2 | |
3.3 | Propeller shaft assembly | 2,0 | Annex 3.3 | |
3.4 | Inner tube, tire, rim | 3,0 | Annex 3.4 | |
4 | Braking system | 3,3 | Annex 4 | |
5 | Suspension system | 4,0 | Annex 5 | |
6 | Steering system | 5,0 | Annex 6 | |
7 | Electrical system | 9,0 | Annex 7 | |
8 | Other components | 1,5 | Annex 8 | |
9 | Assembly process | 2,5 | Annex 9 | |
Total | Total | 100 |
| |
Annex 1.1. Main components of the cabin, trunk, chassis
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Cabin |
|
|
| |||
| - Hood | pcs |
| 0,50 | |||
| - Calant | pcs |
| 0 50 | |||
| - Roof | pcs |
| 1,00 | |||
| - Rear plate | pcs |
| 1,00 | |||
| - Floor | pcs |
| 0,50 | |||
| - Doors | Set/vehicle |
| 1,00 | |||
2 | Windshield | pcs |
| 1,00 | |||
3 | Window glass | pcs |
| 0,50 | |||
4 | Glass run channels | Set/vehicle |
| 1,00 | |||
5 | Engine compartment cover | pcs |
| 0,05 | |||
6 | Seat | pcs |
| 0,20 | |||
7 | Ceiling lining mat | Set/vehicle |
| 0,20 | |||
8 | Mirror | pcs |
| 0,25 | |||
9 | Trunk (complete) | Set/vehicle |
| 5,00 | |||
10 | chassis | pcs |
| 5,00 | |||
11 | Other components |
|
| 1,5 | |||
Total | Total | Total | Total | 19,20 | |||
Annex 1.2. Paintwork and welding of cabin, trunk, chassis
No. | Name | Unit | Quantity in 1 automobile | Grade |
1 | Paintwork of cabin, trunk, chassis |
|
| 3 |
2 | Welding of cabin, trunk, chassis |
|
| 2,50 |
Total |
|
|
| 5,50 |
Annex 2.1. Main components of the engine assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | ||||
1 | Engine block | pcs | 1 | 5,00 | ||||
2 | Head covers + head gasket | Set/vehicle | 1(2) | 1,65 | ||||
3 | Piston + piston ring | Set/vehicle | 1 | 0,80 | ||||
4 | Crankshaft | pcs | 1 | 2,00 | ||||
5 | Cylinder liner (if any) | Set/vehicle | 1 | 0,50 | ||||
6 | Crankshaft bearing | pcs | Varying | 0,10 | ||||
7 | Crankshaft and crank rings | Set/vehicle | 1 | 1,50 | ||||
8 | Flywheel | pcs | 1 | 0,40 | ||||
9 | Flywheel ring gear | pcs | 1 | 0,50 | ||||
10 | Radiator + pipework and valves | pcs | 1 | 2,00 | ||||
11 | Oil pump | pcs | 1 | 1,00 | ||||
12 | Oil filter | pcs | 1 | 0,20 | ||||
13 | Micro oil filter | pcs | 1 | 0,30 | ||||
14 | Water separator (primary) | pcs | 1 | 0,20 | ||||
15 | Water separator (secondary) | pcs | 1 | 0,30 | ||||
16 | Oil pipes | assembly | 1 | 0,25 | ||||
17 | Cam shaft | pcs | 1 | 1,50 | ||||
18 | Cam shaft ring | pcs | Varying | 0,25 | ||||
19 | Cams, pushrods, rockers | assembly | Varying | 1,20 | ||||
20 | Crank | Set/vehicle | 1 | 1,80 | ||||
21 | Valves, pipes, springs | set/vehicle | Varying | 2,50 | ||||
22 | Catalytic converter | pcs | 1 | 0,50 | ||||
23 | Fuel injection pipe assembly | pcs | 1 | 0,125 | ||||
24 | Exhaust pipe assembly | pcs | 1 | 0,125 | ||||
25 | Fuel tank | pcs | 1 | 0,10 | ||||
26 | Fuel pump | pcs | 1 | 0,75 | ||||
27 | Carburettor/high-pressure pump | pcs | 1 | 3,00 | ||||
28 | Spark plug (fuel injector) | pcs | Varying | 1,25 | ||||
29 | Connecting pipes | assembly | 1 | 0,25 | ||||
30 | Pulleys + belts | assembly | 1 | 0,25 | ||||
31 | Exhaust pipe + muffler | pcs | 1 | 0,20 | ||||
32 | Other components |
|
| 1,50 | ||||
Total | Total | Total | Total | 32,00 | ||||
Annex 2.2. Main components of the clutch
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Clutch housing | pcs |
| 0,25 | |||
2 | Friction disc | Set/vehicle |
| 0,50 | |||
3 | Plain plate, springs, rivets | Set/vehicle |
| 0,30 | |||
4 | Clutch transmission system (pedal, crank, throw-out lever) | assembly |
| 0,30 | |||
5 | Pressure plate | pcs |
| 0,20 | |||
6 | Shock absorbtion springs and diaphragm spring | pcs |
| 0,25 | |||
7 | Other components |
|
| 0,20 | |||
Total | Total | Total | Total | 2,00 | |||
Annex 2.3. Main components of the gearbox
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Gearbox housing (main gearbox, auxilliary gearbox, transfer case, etc.) | pcs |
| 1 ,00 | |||
2 | Gearbox cover | pcs |
| 0,25 | |||
3 | Transmission control assembly (positioning mechanism, braking mechanism, gearshift lever, etc.) | assembly |
| 0,70 | |||
4 | Gears | assembly |
| 0,70 | |||
5 | Gearbox shaft assembly (input shaft, layshaft, output shaft, reverse shaft, etc.) | assembly |
| 1,10 | |||
6 | Ball bearings, washers, shaft seals | assembly |
| 0,10 | |||
7 | Other components |
|
| 0,15 | |||
Total | Total | Total | Total | 4,00 | |||
Annex 3.1. Main components of front axle assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Front axle | set |
| 2,30 | |||
2 | Front brake hubs (left/right) | set |
| 0,60 | |||
3 | Other components |
|
| 0,10 | |||
Total | Total | Total | Total | 3,00 | |||
Annex 3.2. Main components of rear axle assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Rear axle housing | set | 1 | 0,70 | |||
2 | Drivetrain | set | 1 | 1,50 | |||
3 | Differential | set | 1 | 0,50 | |||
4 | Side shaft | set | 2 | 0,50 | |||
5 | Rear brake hubs (left/right) | set | 2 | 0,60 | |||
6 | Other components |
|
| 0,20 | |||
Total | Total | Total | Total | 4,00 | |||
Annex 3.3. Main components of propeller shaft assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Front propeller shaft | pcs | 1 | 0,75 | |||
2 | Rear propeller shaft | pcs | 1 | 0,75 | |||
3 4 | Joints and supports Other components | assembly |
| 0,30 0,20 | |||
Total | Total | Total | Total | 2,00 | |||
Annex 3.4. Main components of tires, inner tubes, rims
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Inner tube, tire, rim tapes | Set/vehicle |
| 1,25 | |||
2 | Rims and beadlocks | Set/vehicle |
| 1,25 | |||
3 | Other components |
|
| 0,50 | |||
Total | Total | Total | Total | 3,00 | |||
Annex 4. Main components of the braking system
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Air compressor | pcs | 1 | 0,50 | |||
2 | Brake chamber (or hydraulic cylinder) | Set/vehicle | 4 | 0,50 | |||
3 | Air tank | Set/vehicle | 1 | 0,50 | |||
4 | Pipes and valves | Set/vehicle | 1 | 0,20 | |||
5 | Brake pedal, transmission | Set/vehicle | 1 | 0,10 | |||
6 | Brake pads | Set/vehicle | 1 | 0,50 | |||
7 | Brake shoes | Set/vehicle | 4 | 0,50 | |||
8 | Handbrake | pcs | 1 | 0,20 | |||
9 | Other components |
|
| 0,30 | |||
Total | Total | Total | Total | 3,30 | |||
Annex 5. Main components of the suspension system
No. | Name | Unit | Quantity in 1 automobile | Grade | ||||
1 | Leaf springs (main/auxillary/front/rear) | Set/vehicle | 4 | 1,90 | ||||
2 | Spring eye | pcs | 8 | 0,20 | ||||
3 | Spring hanger | pcs | 4 | 0,20 | ||||
4 | Spring bolt | pcs | 4 | 0,20 | ||||
5 | Spring shackle | pcs | 4 | 0,20 | ||||
6 | Shock absorber | Set/vehicle | 4 | 1,00 | ||||
7 | Shock absorber support | pcs | 4 | 0,20 | ||||
8 | Other components |
|
| 0,10 | ||||
Total | Total | Total | Total | 4,00 | ||||
Annex 6. Main components of the steering system
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Steering wheel | pcs |
| 0,50 | |||
2 | Steering column | pcs |
| 0,20 | |||
3 | Steering gear, including steering assist system (if any) | pcs |
| 3,00 | |||
4 | Pitman arm |
|
| 0,25 | |||
5 | Steering arms and rods | pcs |
| 0,50 | |||
6 | Drag link | set |
| 0,25 | |||
7 | Drag link support | set |
| 0,10 | |||
8 | Other components |
|
| 0,20 | |||
Total | Total | Total | Total | 5,00 | |||
Annex 7. Main components of the electrical system
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Battery | Set/vehicle | 1 | 0,70 | |||
2 | Starter | pcs | 1 | 1,50 | |||
3 | Generator | pcs | 1 | 1,00 | |||
4 | Ignition system (distributor, relays, spark plugs, ignition leads, etc.) | set | 1 | 0,70 | |||
5 | Low beam light, high beam light | pcs | 2 | 0,70 | |||
6 | For light, turn signals | Set/vehicle | 1 | 0,50 | |||
9 | Electrical wires | Set/vehicle | 1 | 0,50 | |||
10 | Electric honk | pcs | 1 | 0,60 | |||
11 | Meters | pcs | 1 | 0,50 | |||
12 | Switch | set | 1 | 0,50 | |||
13 | Electric wiper | pcs | 2 | 0,50 | |||
14 | Radio cassette | pcs | 1 | 1,00 | |||
15 | Other components |
|
| 0,30 | |||
Total | Total | Total | Total | 9,00 | |||
Annex 8. Other components
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | First aid kit and fire safety equipment | pcs | 1 | 0,50 | |||
2 | Car tool kit | pcs | 1 | 0,50 | |||
3 | Other components |
|
| 0,50 | |||
Total | Total | Total | Total | 1,50 | |||
Annex 9. Assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Assembly process |
|
| 2,50 | |||
Total | Total | Total | Total | 2,50 | |||
Appendix 4. MAIN ASSEMBLIES OF HEAVY-DUTY VEHICLES (HEADING 8705)
(except those for passenger transport)
(Promulgated together with Decision No.28/2004/QĐ-BKHCN dated October 01, 2004 of the Minister of Science and Technology)
No. | Main assemblies | Highest grade | Annex | |
1 | Cabin, chassis, relevant assemblies, paintwork, welding work of cabin and chassis | 22,5 |
| |
1.1 | Cabin, chassis and relevant assemblies | 17,0 | Annex 1.1 | |
1.2 | Paintwork and welding work of cabin and chassis | 5,5 | Annex 1.2 | |
2 | Engine – Clutch - Gearbox | 24,5 |
| |
2.1 | Engine | 18 | Annex 2.1 | |
2.2 | Clutch | 2,0 | Annex 2.2 | |
2.3 | Gearbox | 4,5 | Annex 2.3 | |
3 | Transmission system | 11,5 |
| |
3.1 | Front axle | 3,0 | Annex 3.1 | |
3.2 | Rear axle | 4,5 | Annex 3.2 | |
3.3 | Propeller shaft assembly | 1,5 | Annex 3.3 | |
3.4 | Inner tube, tire, rim | 2,5 | Annex 3.4 | |
4 | Braking system | 2,5 | Annex 4 | |
5 | Suspension system | 3,0 | Annex 5 | |
6 | Steering system | 3,5 | Annex 6 | |
7 | Electrical system | 4,0 | Annex 7 | |
8 | Interiors | 5,0 | Annex 8 | |
9 | Assembly process | 2,5 | Annex 9 | |
10 | Special equipment | 21,0 | Varying | |
Total | Total | 100 |
| |
Annex 1.1 Main parts in the body, chassis and relevant assemblies
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | chassis | pcs | 1 | 5,0 | |||
2 | Cabin |
|
| 5,5 | |||
3 | Front bumper | pcs | 1 | 0,5 | |||
4 | Rear bumper | pcs | 1 | 0,3 | |||
5 | Head assembly | pcs | 1 | 1,3 | |||
6 | Tail assembly | pcs | 1 | 1,0 | |||
7 | Roof | pcs | 1 | 1,0 | |||
8 | Glasses | Set/vehicle | Varying | 2,0 | |||
9 | Other components |
|
| 0,4 | |||
Total | Total | Total | Total | 17,0 | |||
Annex 1.2. Paintwork and welding work of body and chassis
No. | Name | Unit | Quantity in 1 automobile | Grade |
1 | Paintwork of the cabin, chassis and relevant assemblies |
|
| 3,0 |
2 | Welding of the cabin, chassis and relevant assemblies |
|
| 2,5 |
Total |
|
|
| 5,5 |
Annex 2.1. Main components of the engine
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Engine block, head cover and crankcase | Set/vehicle | 1 | 3,5 | |||
2 | Piston - cylinder | set | 1 | 2,5 | |||
3 | Crankshaft, cranks and gears | Set/vehicle | 1 | 2,0 | |||
4 | Cooling system (water pump, oil filter, pipes) | Set/vehicle | 1 | 2,5 | |||
5 | Lubricating system (oil pump, oil filter, pipes) | Set/vehicle | 1 | 2,0 | |||
6 | Valve timing system (Cam shaft, cams, pushrods, valves) | Set/vehicle | 1 | 2,0 | |||
7 | Fuel system Petrol engine: carburettor, fuel pump, ingitor, spart plug, filter Diesel engine: manual pump, high-pressure pump | Set/vehicle | 1 | 3,0 | |||
8 | Catalytic converter and support | Set/vehicle | 1 | 0,1 | |||
9 | Exhaust pipe, muffler | Set/vehicle | 1 | 0,1 | |||
10 | Fuel tank | Set/vehicle | 1 | 0,1 | |||
11 | Other components |
|
| 0,2 | |||
Total | Total | Total | Total | 18,0 | |||
Annex 2.2. Main components of the clutch
No. | Name | Unit | Quantity in 1 automobile | Grade | ||||
1 | Friction disc | Set/vehicle | 1 | 0,5 | ||||
2 | Plain plate, springs, rivets | Set/vehicle | 1 | 0,5 | ||||
3 | Clutch transmission | pcs | 1 | 0,5 | ||||
4 | Other components |
|
| 0,5 | ||||
Total | Total | Total | Total | 2,0 | ||||
Annex 2.3. Main components of the gearbox assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Gearbox cover | pcs | 1 | 1,50 | |||
2 | Gears, ball bearings, synchronizer | Set/vehicle | 1 | 2,0 | |||
3 | Transmission control assembly | Set/vehicle | 1 | 0,75 | |||
4 | Other components |
|
| 0,25 | |||
Total | Total | Total | Total | 3,0 | |||
Annex 3.1. Main components of front axle assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Front axle | set | 1 | 2,25 | |||
2 | Front brake hubs (left/right) | set | 2 | 0,5 | |||
3 | Other components |
|
| 0,25 | |||
Total | Total | Total | Total | 3,0 | |||
Annex 3.2. Main components of rear axle assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Rear axle housing | set | 1 | 1,5 | |||
2 | Drivetrain, differential | set | 1 | 1,5 | |||
3 | Side shaft | set | 1 | 1,0 | |||
4 | Rear brake hubs (left/right) | set | 2 | 0,4 | |||
5 | Other components |
|
| 0,1 | |||
Total | Total | Total | Total | 4,5 | |||
Annex 3.3. Main components of propeller shaft assembly
No. | No. | Name | Unit | Unit | Quantity in 1 automobile | Grade | ||||||
1 | 1 | Front propeller shaft | set | set | 1 | 0,4 | ||||||
2 | 2 | Journal | set | set | 1 | 0,4 | ||||||
3 | 3 | Rear propeller shaft | set | set | 1 | 0,5 | ||||||
4 | 4 | Bearing shafts | set | set | 1 | 0,1 | ||||||
5 | Other components | Other components | Other components |
|
| 0,1 | ||||||
Total | Total | Total | Total | Total | Total | 1,5 | ||||||
|
|
|
|
|
|
|
|
|
|
| ||
Annex 3.4. Main components of tires, inner tubes, rims
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Rims and beadlocks | set | Varying | 1,0 | |||
2 | Inner tube, tire, rim tapes | set | Varying | 1,0 | |||
3 | Other components |
|
| 0,5 | |||
Total | Total | Total | Total | 2,5 | |||
Annex 4. Main components of the braking system
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Air compressor | pcs | 1 | 0,4 | |||
2 | Brake chamber (or hydraulic cylinder) | pcs | 4 | 0,5 | |||
3 | Air tank | pcs | 1 | 0,4 | |||
4 | Pipes and valves | set | 1 | 0,4 | |||
5 | Brake pedal | pcs | 1 | 0,1 | |||
6 | Brake pads and brake shoes | set | 4 | 0,3 | |||
7 | Handbrake | pcs | 1 | 0,2 | |||
8 | Other components |
|
| 0,2 | |||
Total | Total | Total | Total | 2,5 | |||
Annex 5. Main components of the suspension system
No. | Name | Unit | Quantity in 1 automobile | Grade | ||||
1 | Leaf springs (main/auxillary/front/rear) | Set/pcs | 4 | 1,5 | ||||
2 | Spring eye | pcs | 8 | 0,1 | ||||
3 | Spring hanger | pcs | 4 | 0,1 | ||||
4 | Spring bolt | pcs | 4 | 0,1 | ||||
5 | Spring shackle | pcs | 4 | 0,1 | ||||
6 | Shock absorber | pcs | 4 | 0,8 | ||||
7 | Shock absorber support | pcs | 4 | 0,1 | ||||
8 | Other components |
|
| 0,2 | ||||
Total | Total | Total | Total | 3,0 | ||||
Annex 6. Main components of the steering system
No. | Name | Unit | Quantity in 1 automobile | Grade | ||||
1 | Steering wheel | pcs | 1 | 0,2 | ||||
2 | Steering column | pcs | 1 | 1,0 | ||||
3 | Steering gear, including steering assist system (if any) | pcs | 1 | 1,5 | ||||
4 | Pitman arm | pcs | 1 | 0,2 | ||||
5 | Drag link | set | 1 | 0,1 | ||||
6 | Drag link support | set | 1 | 0,1 | ||||
7 | Steering arms and rods | set | 1 | 0,2 | ||||
8 | Other components |
|
| 0,2 | ||||
Total | Total | Total | Total | 3,5 | ||||
Annex 7. Main components of the electrical system
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Battery | pcs | 2 | 0,2 | |||
2 | Electrical wires | Set/vehicle | 1 | 0,25 | |||
3 | Low beam and high beam lights | Set/pcs | 2 | 0,5 | |||
4 | Tail lights | Set/pcs | 2 | 0,25 | |||
5 | Turn signals | Set/pcs | 4 | 0,15 | |||
6 | Interior lights | Set/pcs | Varying | 0,25 | |||
7 | Stop button | pcs | Varying | 0,10 | |||
8 | Wiper | Set/pcs | 2 | 0,50 | |||
9 | Electric clock | pcs | Varying | 0,10 | |||
10 | Generator and electric starter | set | 1 | 0,50 | |||
11 | Meters | Set/vehicle | Varying | 1,00 | |||
12 | Other components |
|
| 0,20 | |||
Total | Total | Total | Total | 4,00 | |||
Annex 8. Main components of the interior assembly
No. | Name | Unit | Quantity in 1 automobile | Grade | |||
1 | Window frames | set | Varying | 0,2 | |||
2 | Window glasses | set | Varying | 0,4 | |||
3 | Glass run channels | set | Varying | 0,1 | |||
4 | Driver side window glass | pcs | 1 | 0,2 | |||
5 | Driver glass run channel | pcs | 1 | 0,2 | |||
6 | Front glass run channel | pcs | 1 | 0,2 | |||
7 | Windshield | pcs | 1 | 1,0 | |||
8 | Rear window | pcs | 1 | 0,4 | |||
9 | Rear glass run channel | pcs | 1 | 0,2 | |||
10 11 | mirrors Interior lining materials + edges | Set/vehicle Set/vehicle | 1 1 | 0,2 0,5 | |||
12 | Noise isolating and anti-vibration materials | Set/vehicle | 1 | 0,1 | |||
13 | Handles and stands | Set/vehicle | 1 | 0,1 | |||
14 | Automatic power door locks | set | Varying | 0,2 | |||
15 | Radio cassette + speakers | Set/vehicle | Varying | 0,3 | |||
16 | Dashboard | Set/vehicle | Varying | 0,3 | |||
17 | Driver’s seat | pcs | 1 | 0,2 | |||
18 | Other components |
|
| 0,2 | |||
Total | Total | Total | Total | 5,0 | |||
Annex 9. Assembly
No. | Name | Unit | Quantity in 1 automobile | Grade |
1 | Assembly process |
|
| 2,5 |
| Total |
|
| 2,5 |
LawSoft and for reference purposes only. Its copyright is owned by LawSoft
---------------
This document is handled by Vinas Doc. Document reference purposes only. Any comments, please send to email: [email protected]